top of page
OBD2 GPS TRACKER
Professional 4G OBD vehicle tracker you can easily install. With its advanced accelerometer, gyroscope, and special algorithm, can detect improper driving behaviors, precisely calculate mileages, and prevent dark spots occur in areas with poor GNSS signals.
 
Easily reasigned to another vehicle in minutes
 
By leveraging different 4G communication modules, it covers almost all global LTE frequency bands. A revolutionary update is the voice alarm, which can remind drivers to behave correctly when their bad driving activities have been detected. Moreover, it also supports the embedded microphone for remote listen-in.
 
BENEFITS
 
  • Plug into OBDII port allowing easy installation
  • INS-aided GPS Tracking- Ensures constant tracking in the area with poor GPS signal or even without it.
  • Remote Listen-in - Inconspicuous mic allows for remote audio monitoring of the environment around the device.
  • 4G LTE Communication -The device can receive and transmit data in the coverage of 4G, 3G and 2G networks.
  • Voice Alarm - In risky circumstances, internal speaker will sound human voice to remind drivers to drive carefully.
  • Mileage Accuracy ≥98%  - Precise mileage calculation based on a unique algorithm, the mileage error can be less than 2%.
    • BLE4.0 Supported - Through bluetooth connection you can configure parameters, upgrade software, and debug.
    • 9-36V Operating Voltage - Compatible with a wide range of input voltage, able to work on diverse vehicles.
    • Driving Behavior Analysis (Advanced) - Receive alerts when any of 8 kinds of dangerous driving behavior is detected.
 
BUSINESS USE
 
  • Car rental
  • Van leasing
  • Car dealerships
  • Insurances
  • Fleet tracking
  • Service vehicles
  • Food delivery
 
JM-VL04
http://www.q

OBD2 GPS TRACKER

  • GSM Specifications (GV500ME, GV500MB)

    Frequency 850/900/1800/1900 MHz
    Data Transmission GPRS multi-slot class 33 (33 by default)
    EDGE multi-slot class 33 (33 by default)

    LTE Specifications

    Model

    Item

    		 GV500MA GV500ME GV500MB
    Operating Band B2/B4/B5/B12/B13 B3/B8/B20 B3/B28
    Data Transmission

    eMTC (DL) 375 Kbps

    eMTC (UL) 375 Kbps

    NB1 (DL) 32 Kbps

    NB1 (UL) 70 Kbps

    GNSS Specifications

    GNSS Type u-blox All-in-One GNSS receiver
    Sensitivity

    Autonomous: -147 dBm

    Hot start: -156 dBm

    Reacquisition: -160 dBm

    Tracking: -162 dBm
    Position Accuracy (CEP) Autonomous: < 2.5m
    TTFF (Open Sky)

    Cold start: 27s average

    Warm start: 27s average

    Hot start: 1s average

    General Specifications

    Dimensions 49.49mm(L) x 48.5mm(W) x 21.9mm(H)
    Weight 58g
    Backup Battery Li-Polymer, 60 mAh
    Operating Voltage 8V to 32V DC
    Operating Temperature

    -30℃ ~ +80℃

    -40℃ ~ +80℃ for storage
    BLE Support BLE 4.2 protocol

    Interfaces

    OBDII Port Provide device power
    Cellular Antenna Internal only
    GNSS Antenna Internal only
    BLE Antenna  Internal only
    LED Indicators CEL, GNSS
    Micro USB Interface Used for upgrading and debugging

    Air Interface Protocol

    Transmit Protocol TCP, UDP, SMS
    Scheduled Timing Report Report position and status at preset time intervals
    OBDII Disconnection Alarm Alarm report of OBDII connection and disconnection status
    Geo-fences Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
    Low Power Alarm Alarm when backup battery is low
    Power on Report Report when the device is powered on
    Driving Behavior Monitoring Aggressive driving behavior detection, e.g. harsh braking and acceleration
    Crash Detection Accident data collection for reconstruction and analysis
    Tow Alarm Alarm trigger based on built-in 3-axis accelerometer

     

bottom of page